SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 501)

GVRP
AND
B
RIDGE
E
XTENSION
C
OMMANDS
4-239
GVRP and Bridge Extension Commands
GARP VLAN Registration Protocol defines a way for switches to exchange
VLAN information in order to automatically register VLAN members on
interfaces across the network. This section describes how to enable GVRP
for individual interfaces and globally for the switch, as well as how to display
default configuration settings for the Bridge Extension MIB.
bridge-ext gvrp
Use this command to enable GVRP globally for the switch. Use the no form
to disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
Table 4-58 GVRP and Bridge Extension Commands
Command Function Mode Page
bridge-ext gvrp Enables GVRP globally for the switch GC 4-239
show bridge-ext Shows the global bridge extension
configuration PE 4-240
switchport gvrp Enables GVRP for an interface IC 4-241
switchport forbidden vlan Configures forbidden VLANs for an
interface
IC 4-236
show gvrp configuration Displays GVRP configuration for
selected interface NE,
PE 4-241
garp timer Sets the GARP timer for the selected
function IC 4-242
show garp timer Shows the GARP timer for the
selected function NE,
PE 4-243