SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 492)

C
OMMAND
L
INE
I
NTERFACE
4-230
Configuring VLAN Interfaces
interface vlan
Use this command to enter interface configuration mode for VLANs, and
configure a physical interface.
Syntax
interface vlan vlan-id
vlan-id - ID of the configured VLAN. (Range: 1-4094, no leading
zeroes)
Default Setting
None
Table 4-56 Configuring VLAN Interfaces
Command Function Mode Page
interface vlan Enters interface configuration mode for a
specified VLAN IC 4-230
switchport mode Configures VLAN membership mode for
an interface IC 4-231
switchport
acceptable-frame-types Configures frame types to be accepted by an
interface IC 4-232
switchport
ingress-filtering Enables ingress filtering on an interface IC 4-233
switchport native vlan Configures the PVID (native VLAN) of an
interface
IC 4-234
switchport allowed vlan Configures the VLANs associated with an
interface
IC 4-235
switchport gvrp Enables GVRP for an interface IC 4-241
switchport forbidden
vlan Configures forbidden VLANs for an
interface IC 4-236
switchport priority
default Sets a port priority for incoming untagged
frames IC 4-246