Slicing parameters – Native Instruments MASCHINE MK3 Groove Production Studio (Black) User Manual
Page 896
For more information on the Cue channel, please refer to section
If there are more than 16 Slices, you can select which set of 16 Slices should be triggered by
your pads:
►
If there are more than 16 Slices, press
SHIFT
+ Button 7 or 8 to switch your pads to the
previous/next 16 Slices, respectively.
Note that we haven’t applied any slicing yet: For now your pads only allow you to prelisten how the
proposed
would sound
after you apply the slicing. Applying the slicing will be described in section
.
Slicing Parameters
Following parameters are available:
Parameter
Description
TIME Section
MODE
Here you can select either
DETECT
,
SPLIT
,
GRID
, or
MANUAL
:
Detect mode: The Sample will be sliced according to its transients.
Split mode: The Sample will be sliced into equally spread Slices.
Grid mode: The Sample will be sliced according to note values.
Manual mode: Manually enter slice points using the pads on your
controller, and edit the start and end points of a slice.
SLICES
(Split and
Grid mode only)
When
MODE
is set to
SPLIT
(see above),
SLICES
lets you choose the
amount of Slices: 4, 8, 16 or 32.
When
MODE
is set to
GRID
(see above),
SLICES
lets you choose the
length of the Slices in note values: 4th, 8th,16th or 32nd notes.
Sampling and Sample Mapping
Slicing a Sample
MASCHINE - Manual - 896