Clearing a pattern in song view, 7 clearing a pattern in song view – Native Instruments MASCHINE MK3 Groove Production Studio (Black) User Manual
Page 843
▪
The value set in the Arrange Grid is used for length increments. For more information on
Arrange Grid, read:
▪
When [Shift] is pressed while changing the length, the value set in the Step Grid is used.
For more information on Step Grid, read:
11.1.7, Adjusting the Step Grid and the Nudge
.
▪
The minimum length a Section marker can be dragged without modifier is one Arrange Grid
increment.
▪
When [Shift] is pressed, the minimum length a Section marker can be dragged is one Step
Grid increment.
▪
The minimum length of a Section equals the minimum Scene length. This can only be ach-
ieved if Arrange Grid or Step Grid is set to
Off
.
16.3.6.2 Adjusting the Length of a Section Using the Controller
To adjust the length of a Section using your hardware controller:
1.
Press
SHIFT
+
SCENE
(
Section
) to enter Song view.
2.
Press
SCENE
(
Section
) to enter Section mode.
3.
Select the pad relating to the Scene you want to adjust.
4.
Turn Knob 4 to adjust the length of the Section as required. Turning the knob left will
shorten the Section, turning it right will lengthen the Section.
5.
Press
SHIFT
and turn Knob 4 to change the Section length in smaller increments.
→
The Section length is adjusted accordingly.
16.3.7 Clearing a Pattern in Song View
Clearing a Pattern allows you to remove all its contents, leaving the Pattern empty.
To clear a Pattern in Song view:
1.
Right-click ([Ctrl]-click on macOS) the name of the Pattern you want to clear.
2.
Select
Clear
from the context menu.
→
The Pattern is cleared of all its contents.
Working with the Arranger
Using Song View
MASCHINE - Manual - 843