Native Instruments MASCHINE MK3 Groove Production Studio (Black) - Manual (Page 524)

Selection Tool Description
Pads Unlit pads indicate pitches at which the Pattern has no notes. Nothing
happens when you press them.
Dimmed pads indicate pitches at which notes can be selected: Press
any dimmed pad to add all notes at that pitch to the selection. The
pad turns fully lit to indicate that all its notes are selected. You can
press any additional dimmed pad to add its notes to the selection.
Fully lit pads indicate pitches at which all notes are selected: Press any
lit pad to remove all its notes from the selection (the pad turns dim
lit).
4-D encoder Select an event: Turn the 4-D encoder to select an event.
Nudge: Move the 4-D encoder left/right to nudge the selected event.
Press Button 4 ( GRID ) to move events relative to the value of the Step
Grid.
Change pitch: Move the 4-D encoder up/down to change the pitch of
the selected event.
Change event length: Press and turn the 4-D encoder to change the
length of the selected event. Press Button 4 (
GRID ) to resize events
relative to the value of the Step Grid.
Button 2 ( SELECT ) Switch between Event Select mode and Event Edit mode.
Button 4 ( GRID ) Selects/deselects the Step Grid. When the GRID is selected, events
can be nudged or resized with the 4-D encoder relative to the value of
the Step Grid. Press
SHIFT + FOLLOW ( Grid ) to access the Step Grid.
Button 5/6 ( ALL /
NONE )
Selects/deselects all notes for all pitches of the current Sound, in
short all events of that Sound.
Button 7/8 ( UP /
DOWN )
Switch the focus to the previous/next Sound in order to add or remove
some of its notes to/from the selection. The name of the selected
Sound is indicated under the
EVENTS label in the top left corner of
the left display.
Working with Patterns
Editing Events
MASCHINE - Manual - 524