Touch auto-write option, 12 touch auto-write option, Enabling/disabling touch auto-write – Native Instruments MASCHINE MK3 Groove Production Studio (Black) User Manual
Page 108

▪
KOMPLETE KONTROL Keyboard MK1: Press
INSTANCE
and turn the Control encoder to
select the desired instance, and press the Control encoder to load it.
▪
KOMPLETE KONTROL Keyboard MK2: Press
INSTANCE
and turn the 4-D encoder to se-
lect the desired instance, and press the 4-D encoder to load it.
3.3.12 Touch Auto-Write Option
Modulation recording also benefits from the touch sensitivity of Knobs 1–8 via the Touch Auto-
write option.
Reminder: To record modulation from your MASCHINE controller, activate playback, switch your
controller to Auto-write mode by pressing and holding
AUTO
, and then turn the Knobs 1–8 to adjust
parameters. For more information, please refer to section
Enabled by default, the Touch Auto-write option allows you to record modulation events as
soon as you touch Knobs 1–8, even if you don’t rotate them:
▪
If Touch Auto-write is disabled, modulation events are recorded only when you rotate the
Knobs 1–8 (as in previous MASCHINE versions).
▪
If Touch Auto-write is enabled, modulation events are recorded as soon as you touch the
Knobs 1–8, whether you actually rotate them or not:
◦
If you rotate the Knobs, the new modulation values are recorded for the corresponding
parameters.
◦
If you touch the Knobs but don’t rotate them, the last modulation values for these pa-
rameters keep being recorded as new events as the playhead moves forward, thereby
overwriting any existing modulation events at the playhead position. Modulation stops
being recorded when you release the Knob(s).
Enabling/Disabling Touch Auto-Write
The Touch Auto-write option can be enabled or disabled in the
Hardware
page of the
Preferen-
ces
panel:
Basic Concepts
Common Operations
MASCHINE - Manual - 108