A few notes on send effects – Native Instruments MASCHINE MK3 Groove Production Studio (Black) User Manual
Page 708
and number followed by the Sound number (in the example underneath we selected the
entry
A1:S1-1
for the
Aux 1
output).
7.
Use Knob 2 (
Aux 1 LEVEL
) to adjust the level of the signal sent to that auxiliary output.
The signal of each auxiliary output is taken by default after the main output level control has been
applied. This can be changed via Knob 3 (
Aux 1 ORDER
). For more information, please see section
12.1.3, Setting Up Auxiliary Outputs for Sounds and Groups
You can repeat the process to route more Sounds/Groups to the same send effect, or route the
same Sound/Group to another send effect send using
Aux 2
.
14.3.3 A Few Notes on Send Effects
When working with send effects, please keep in mind the following:
▪
You cannot send the Master output to send effects.
▪
You cannot send a send effect’s output to itself, nor the output of a Group to one of its own
Sounds.
However, you can:
▪
Chain several Sounds configured as send effects by sending the output of a send effect in-
to another send effect using the method described above (see
▪
Use the Effect Plug-ins loaded in a Group to simultaneously process its own Sounds and
other Sounds/Groups sent to it.
This opens up virtually endless routing possibilities!
Using Effects
Creating a Send Effect
MASCHINE - Manual - 708