Set up a sound as send effect on the controller – Native Instruments MASCHINE MK3 Groove Production Studio (Black) User Manual
Page 704
→
The Sound slot now mirrors the Plug-in name.
For more information on renaming Sound slots, see section
Set Up a Sound as Send Effect on the Controller
1.
Press the
PLUG-IN
button to enter Control mode and show the Plug-in slots.
2.
Press Button 3 to select the
SOUND
tab
3.
Press the Group button
A
–
H
of the Group containing the empty Sound you want to use. If
the Group in question is in another bank, before you select the Group you first need to
press
SHIFT
+ the corresponding Group button
A
–
H
to select its Group bank.
4.
Press
SELECT
+ the unlit pad of the empty Sound you want to use (or simply hit its unlit
pad if pads are in Pad Mode).
Since we have selected an empty Sound, you see
(NONE)
under Button 7/8 and these
buttons are inactive (i.e. there are no Plug-ins to navigate yet).
5.
Press
SHIFT
+
BROWSE
to open the Plug-in Browser and browse the available Instrument
and Effect Plug-ins.
6.
On the left display, turn Knob 1 to select the
TYPE
to
Effect
.
7.
If you have selected the first Plug-in slot of a Sound, turn Knob 2 to select the
VENDOR
from
INTERNAL
, or the name of a vendor, e.g.
Native Instruments
.
8.
Turn the 4-D encoder or Knob 8 to browse the effects Plug-ins corresponding to your se-
lection.
Using Effects
Creating a Send Effect
MASCHINE - Manual - 704