Native Instruments MASCHINE MK3 Groove Production Studio (Black) - Manual (Page 286)

3. Turn Knob 3 ( LINK GROUP ) to select the desired Link group 1 – 8 for that pad or choose
NONE (default setting) to remove the pad from its current Link group.
4. Turn Knob 4 ( LINK MODE ) to select the Link mode from MASTER (default setting) or
SLAVE for that pad.
5. Release PAD MODE (or press it again if you pinned the mode).
6.2 Adjusting the Key, Choke, and Link Parameters for Multiple Sounds
In the software, if you select multiple Sounds with different Key , Choke and/or Link values, the
corresponding parameters in Pad view now display MULTI . On your controller in Pad Mode, the
corresponding parameters now display ( MULTI ).
Moreover, you can adjust these parameters for the selected Sounds as described below.
Adjusting the Key Parameter for Multiple Sounds with different Key Values
► Click and drag the MULTI label next to Key to transpose the base key of all selected
Sounds. While dragging, the field displays a + / -x value indicating the transposition that
will apply to all Sounds as you release the mouse button.
Sound slots 1 to 4 are selected. If they have different Key values, a MULTI label appears (left). When you drag it (middle), a
transpose value appears (right) that will be applied to all selected Sounds when you will release the mouse button.
This is also true when adjusting the parameter from your controller.
Playing on the Controller
Adjusting the Key, Choke, and Link Parameters for Multiple Sounds
MASCHINE - Manual - 286