Adjusting midi preferences using the controller, 4 preferences – default page – Native Instruments MASCHINE MK3 Groove Production Studio (Black) User Manual
Page 133

Setting
Description
Outputs
Click
Output
to display a list of all the available MIDI outputs of
your system. You can activate/deactivate each output by clicking
the fields in the
Status
column, which displays the current status of
the corresponding port.
Adjusting MIDI Preferences Using the Controller
You can access the MIDI preferences directly from the controller. The options found here are a
replica of those found in the software.
To access the MIDI preferences from your controller:
1.
Press
SETTINGS
to display the Settings page.
2.
Press Button 3 (
MIDI
) to access the hardware settings.
▪
Turn Knob 1 (
MODE
) to adjust the MIDI Sync mode preference.
▪
Turn Knob 2 (
CLOCK OFFSET
) to adjust the Clock Offset.
▪
Turn Knob 5 (
SELECT
) to select a MIDI Input Device.
▪
Turn Knob 6 (
STATUS
) to enable or disable a MIDI Input Device.
▪
Turn Knob 7 (
SELECT
) to select a MIDI Output Device.
▪
Turn Knob 8 (
STATUS
) to enable or disable a MIDI Output Device.
►
To save your settings and return to MASCHINE mode, press
SETTINGS
.
If you want MASCHINE to send other MIDI messages than MIDI Clock, in particular if you want to
control other MIDI-capable devices via the notes played in MASCHINE, please refer to section
12.2.5, Sending MIDI from Sounds
3.7.4
Preferences – Default Page
The
Default
page allows you to define the default settings that will be used for each new
Project.
►
To display the
Default
page, click the
Default
tab on the left of the
Preferences
panel.
Basic Concepts
Preferences
MASCHINE - Manual - 133