Native Instruments MASCHINE MK3 Groove Production Studio (Black) User Manual
Page 720
Parameter
Description
INPUT Section
Source
Selects the audio signal you want to use as side-chain signal to
control the Plug-in. Available options are
None
(side-chain
disabled, default setting), the outputs of all (other) Sounds , and
the outputs of all (other) Groups.
In the menu these outputs are labeled as follows:
For Groups: [Group name] (e.g.,
Drums
)
For Sounds: [Group name]: [Sound name] (e.g.,
Drums: Kick
)
In the selector display these outputs are labeled as follows:
For Groups: [Group name] (e.g.,
Drums
)
For Sounds: [Group letter+number]:S[Sound number] (e.g.,
A1:S4
for
the Sound 4 of Group A1)
Gain
Adjusts the input level of the side-chain signal fed into the Plug-in.
FILTER Section
Filter
Activates a filter on the side-chain input. This filter can be useful to
select only a specific frequency range of the side-chain signal to
control the Plug-in.
Center Freq
Adjusts the center frequency of the filter.
Width
Adjusts the bandwidth of the filter.
On your controller the outputs available in the
SOURCE
parameter are labeled as in the display of
the
Source
selector described above.
For more information on how to use the side-chain input, please refer to section
Effect Reference
Dynamics
MASCHINE - Manual - 720