Enabling/disabling and adjusting the step grid, Adjusting the nudge grid – Native Instruments MASCHINE MK3 Groove Production Studio (Black) User Manual
Page 500
Enabling/Disabling and Adjusting the Step Grid
To change the Step Grid resolution:
1.
Hold
SHIFT
+
FOLLOW
(
Grid
) to enter Grid mode.
2.
Press Button 4 (
STEP
) to access the Step and Nudge Grid settings.
The right display will show you which pad represents a resolution:
3.
Select a step size by pressing the corresponding pad. Alternatively you can repeatedly
press Button 5–8 to successively select each of the resolutions in the corresponding col-
umn.
→
The selected value is highlighted on the right display and the corresponding pad turns
fully lit.
To disable the Step Grid, simply select the
OFF
value in the top right corner:
►
To disable the Step Grid, hold
SHIFT
+
FOLLOW
(
Grid
), press Button 4 (
STEP
), then
press pad
16
(
OFF
).
You don’t need to explicitly enable the Step Grid on your controller: It is enabled as soon as you
select a step size other than
OFF
(pad
16
).
Adjusting the Nudge Grid
To change the Nudge Grid resolution:
1.
Hold
SHIFT
+
FOLLOW
(
Grid
) to enter Grid mode.
2.
Press Button 4 (
STEP
) to access the Step and Nudge Grid settings.
3.
Turn Knob 4 (
NUDGE
) to select the desired Nudge Grid resolution.
Working with Patterns
Pattern Basics
MASCHINE - Manual - 500