Native Instruments MASCHINE MK3 Groove Production Studio (Black) - Manual (Page 688)

2. If you want to apply the effect to the Master (to process the audio of the whole Project),
press Button 1 to select the MASTER tab.
3. If you want to apply the effect to a Group (to process the audio of the whole Group), press
Button 2 to select the GROUP tab and press the Group button A – H corresponding to the
desired Group. If the desired Group is in another bank, before you select the Group you
first need to press
SHIFT + the corresponding Group button A – H to select the Group
bank.
4. If you want to apply the effect to a Sound, press Button 3 to select the SOUND tab, se-
lect the Group containing that Sound (see previous step), and press SELECT + the pad of
that Sound (or simply hit its pad if pads are in Pad Mode).
5. Move the 4-D encoder right to navigate to the Plug-in slot where you want to load the ef-
fect (the name of the Plug-in currently loaded in the selected slot appears between the
arrows under Button 5 and 6 as well as on the left display). If you want to add the effect
in addition to the existing Plug-ins, press Button 6 repeatedly to select
EMPTY .
6. Press the 4-D encoder or SHIFT + BROWSER ( Plug-in ) to open the Plug-in Browser and
browse the available Plug-ins.
7. On the left display, turn Knob 1 to select the TYPE from Instrument or Effect . The Instru-
ment option only appears when applying effects to Sounds.
The right display shows the list of available instruments or effect Plug-ins.
8. Turn Knob 2 to select the VENDOR from INTERNAL , or the name of the vendor e.g. Na-
tive Instruments .
If you have selected any other Plug-in slot the TYPE field is not available — only Effect
Plug-ins will be listed in the right display.
9. Turn the 4-D encoder or Knob 8 to browse the available Plug-ins.
Using Effects
Applying Effects to a Sound, a Group or the Master
MASCHINE - Manual - 688