Native Instruments MASCHINE MK3 Groove Production Studio (Black) - Manual (Page 701)

3. Click the desired effect in the list. If you have VST/AU effect plug-ins installed you may
also load them from the menu by selecting the Native Instruments (Native Instruments
products) or External (third-party products) submenu at the top of the list.
→ Upon your selection the effect is loaded in a new Plug-in slot and directly starts to proc-
ess your external audio!
Loading an Effect to Process an Input on the Controller
On your controller:
1.
Press the PLUG-IN button to show the Plug-in slots of the selected Sound.
Since we have selected an empty Sound, you see EMPTY on the left of the left display as
well as under Button 5/6 on the right display (i.e. there are no Plug-ins to navigate yet).
2. Press SHIFT + BROWSER ( Plug-in ) to open the Plug-in Browser and browse the available
Plug-ins.
3. On the left display, turn Knob 1 to select the TYPE to Effect .
4. If you have selected the first Plug-in slot of a Sound, turn Knob 2 to select the VENDOR
from INTERNAL , or the name of a vendor, e.g. Native Instruments .
5. Turn the 4-D encoder or Knob 8 to browse the effects Plug-ins corresponding to your se-
lection.
6. When you have found the Plug-in you want to use, press the 4-D encoder or Button 8
(
LOAD ) to load it. You can also use Buttons 5 and 6 to step through the list and load each
effect directly.
→ The selected effect is loaded in a new Plug-in slot and directly starts to process your ex-
ternal audio. By pressing
PLUG-IN or SHIFT + BROWSE again you can switch back to
Control mode and adjust the effect.
14.3 Creating a Send Effect
Sometimes you may want to have a classic send effect, for example a reverb which can be
shared by multiple sound sources. To make use of a send effect, you need to:
Using Effects
Creating a Send Effect
MASCHINE - Manual - 701