Send midi clock, 3, send midi clock, 3 send midi clock – Native Instruments MASCHINE MK3 Groove Production Studio (Black) User Manual
Page 158
If you want to configure MASCHINE to react to other MIDI messages than MIDI Clock, in particular
if you want to control MASCHINE notes and parameters via MIDI, please refer to section
ing MIDI Control and Host Automation
, where this is described in detail.
3.8.3
Send MIDI Clock
If MASCHINE is running as a stand-alone application, it can also send a MIDI Clock signal to
any device that is capable of receiving MIDI Clock. This could be hardware such as a drum
machine, another groovebox, or even another software sequencer.
If you use MASCHINE as a plug-in, it cannot send any MIDI Clock signal. See section
for more information on using MASCHINE as a plug-in.
To configure MASCHINE to receive MIDI Clock from an external device:
1.
Select
Preferences
entry from the
File
menu.
2.
Select the
MIDI
page.
3.
In the
Sync
section select
Master (Send Clock)
from the menu.
→
MASCHINE will send a MIDI Clock signal to any connected device that is capable of re-
ceiving MIDI Clock.
You can adjust the MIDI Clock offset in the
MIDI
page of the
Preferences
panel. See
If you want MASCHINE to send other MIDI messages than MIDI Clock, in particular if you want to
control other MIDI-capable devices via the notes played in MASCHINE, please refer to section
12.2.5, Sending MIDI from Sounds
Basic Concepts
Integrating MASCHINE into a MIDI Setup
MASCHINE - Manual - 158