Swing and position shortcuts – Native Instruments MASCHINE MK3 Groove Production Studio (Black) User Manual
Page 297

In the software you can also adjust the output level of the Master via the Master Volume slider
in the Header:
The Master Volume slider in the software’s Header.
To reset the output level of the Master to 0 dB, double-click the Master Volume slider.
Swing and Position Shortcuts
The SWING button.
In Pad Mode, Keyboard mode or Chords mode:
1.
Press
SWING [Position]
button.
2.
To change the groove of the Master, simply turn the 4-D encoder.
3.
To change the groove of a Group, hold its Group button (first navigate to its Group bank if
necessary) and turn the 4-D encoder.
4.
To change the groove of an individual Sound, hold its pad (or hold
SELECT
+ its pad if
pads are in Keyboard mode) and turn the 4-D encoder. In Keyboard mode you can also
press
SELECT
+ the pad of the desired Sound, then hold any pad (i.e. any pitch of that
Sound) and turn the 4-D encoder.
In Step mode:
Playing on the Controller
Playing Tools
MASCHINE - Manual - 297