Quick edit shortcuts for the selected steps – Native Instruments MASCHINE MK3 Groove Production Studio (Black) User Manual
Page 512
Editing Tool
Description
Knob 1 (
POSITION
)
Nudges selected events, i.e. shifts selected events on the timeline
according to the Nudge Grid (the events’ offsets relative to the Nudge
Grid are preserved). Hold
SHIFT
while you turn the knob to temporarily
override the Nudge Grid quantization and adjust the positions in
extremely small increments. See section
for more information on the Nudge Grid.
If one event only is selected, its position is shown under
POSITION
. If
several events are selected, the field shows
(MULTI)
.
Knob 2 (
PITCH
)
Transposes the selected events by semitones.
When only one event is selected, its pitch is shown under
PITCH
. If
several events are selected, the field shows
(MULTI)
.
Knob 3 (
VELOCITY
)
Adjusts the velocity of the selected events. If the events have different
velocities, the velocities differences are retained as long as the limits
(0 and 127) are not reached. When only one event is selected, its
velocity is shown under
VELOCITY
. If several events are selected, the
field shows
(MULTI)
.
Knob 4 (
LENGTH
)
Moves the end of the selected events according to the Step Grid (the
offset of each events' end relative to the Step Grid is preserved). Hold
SHIFT
while you turn the knob to temporarily override the Step Grid
quantization and adjust the lengths in extremely small increments. If
the events have different lengths, the length differences are retained
as long as no event becomes shorter than one step.
When only one event is selected, its length is shown under
LENGTH
. If
several events are selected, the field shows
(MULTI)
.
Quick Edit Shortcuts for the Selected Steps
You can also quickly adjust the velocity, pitch, and position of any events via the Quick Edit
shortcuts:
1.
Press and hold the pad(s) of the step(s) you want to edit.
Working with Patterns
Recording Patterns with the Step Sequencer
MASCHINE - Manual - 512