Native Instruments MASCHINE MK3 Groove Production Studio (Black) - Manual (Page 344)

You can also recall the search query that was used to find the Plug-in preset currently loaded in the
Plug-in slot (see section
↑ 4.8, Using Quick Browse for more information).
7.1.4 Adjusting the Plug-in Parameters
The procedure for adjusting the Plug-in parameters is common to all types of Plug-ins and all
sets of Channel properties. It is described in section ↑ 3.3.9, Navigating Channel Properties,
Plug-ins, and Parameter Pages in the Control Area .
Native Instruments and External Plug-ins only: You can also adjust the Plug-in parameters via the
own user interface of the VST/AU plug-in. More on this in
↑ 7.3, Using Native Instruments and Ex-
ternal Plug-ins .
7.1.5 Bypassing Plug-in Slots
You can bypass (or “mute”) any Plug-in slot. When a Plug-in slot is bypassed, the Plug-in it
contains is temporarily removed from the signal flow and does not process the audio passing
through the slot. Instead, the incoming audio is directly sent to the next Plug-in slot for further
processing (or to the channel’s output if you bypass its last Plug-in slot).
Bypassing Plug-in slots can be very useful in various situations, for example:
▪ Bypassing and re-enabling an effect during a live performance.
▪ Comparing the sound with and without an effect.
▪ Troubleshooting complex effect chains and routings (“Where does this strange reverb tail
come from?”).
To bypass a Plug-in, do the following:
1.
If you want to bypass a Plug-in of the Master, click the MASTER tab in the top left corner
of the Control area.
2. If you want to bypass a Plug-in of a Group, click the desired Group on the left of the Ar-
ranger, and click the
GROUP tab in the top left corner of the Control area.
Working with Plug-ins
Plug-in Overview
MASCHINE - Manual - 344