Native Instruments MASCHINE MK3 Groove Production Studio (Black) - Manual (Page 341)

Plug-in Menu Entry Description
Save As… Allows you to save the current Plug-in settings as a preset for
later use. This preset will appear in the Browser.
Save As Default… (only
when a Native Instruments
or External Plug-in is
loaded)
Allows you to save the current Plug-in settings as a default
preset. This default preset will be recalled each time you load
the Plug-in from the Plug-in menu.
Note that the first two submenus Native Instruments and External only show the Plug-ins that are
enabled in the Plug-ins page of the Preferences panel. For more on this, see section ↑ 3.7.6, Prefer-
ences – Plug-ins Page .
The edit commands ( Cut , Copy , and Paste ) and preset management commands ( Open , Save As… ,
and Save As Default… ) available at the bottom of the Plug-in menu will be covered in section
↑ 7.1.7, Moving Plug-ins and ↑ 7.1.9, Saving and Recalling Plug-in Presets , respectively.
7.1.3.1 Browser Plug-in Slot Selection
Select a plug-in slot directly from the Browser using the SHIFT button. The SHIFT button pro-
vides temporary access to the Plug-in mode allowing you to select a plug-in slot from the Plug-
in List. This can be accomplished from the Browser when loading content into all three levels
of the MASCHINE audio routing system: in Sounds, in Groups, and in the Master.
To change the focus of the plug-in slot from the Browser:
1.
Press the BROWSE button.
2. Press SHIFT , then press button 5 or 6 to select to a plug-in slot.
→ The focus slot can be selected from the browser.
To change the focus of the plug-in slot from the Browser:
1.
Press the BROWSE button.
2. Press SHIFT , then press button 7 or 8 to select a plug-in slot.
The focus slot can be selected from the browser.
Working with Plug-ins
Plug-in Overview
MASCHINE - Manual - 341