Choosing a recording mode – Native Instruments MASCHINE MK3 Groove Production Studio (Black) User Manual
Page 866

▪
If
SOURCE
is set to
Internal
, you can select the output of any available Group or the Mas-
ter.
You can easily record the output of a particular Sound by setting
SOURCE
to
Internal
, soloing this
Sound and selecting its parent Group in the
INPUT
selector!
You can also set
SOURCE
to
Internal
, choose as
INPUT
a Group with a drum kit loaded, and record
your live improvisations on the pads while playing this drum kit. You will then have your own im-
provisations recorded as Samples, ready to be used, edited, sliced, etc., as any other Samples in
MASCHINE.
Choosing a Recording Mode
►
Click the
MODE
selector to select from the three available recording modes:
▪
Detect: Select
Detect
mode to record audio after the set threshold has been exceeded. This
is useful when you want to record audio without the silence before the incoming sound is
played. If the focused Sound Slot contains neither an Audio nor Sampler plug-in, then the
recorded audio will be loaded automatically into a Sampler plug-in for the first Take. You
must trigger the Sampler with MIDI Events, such as those in a Pattern, to play back the
audio.
◦
If
Detect
is selected, you can set a certain threshold using the level
THRESHOLD
con-
trol on the right. After you clicked
Start
, any input signal level exceeding this thresh-
old will start the recording. You can then manually stop the recording by clicking
Stop
. You can also adjust the threshold by dragging the slider that appears on the hor-
izontal input level meters above the
RECORDING
section:
Any input level reaching the slider position will start the recording. Double-click the
slider to reset the threshold to its default value (-12 dB).
▪
Sync: Select
Sync
to start recording audio in time with the Pattern Grid. If the focused
Sound Slot contains neither an Audio nor Sampler plug-in, then the recorded Sample will
be loaded automatically into a Sampler plug-in as the first Take. You must trigger the Sam-
pler with MIDI Events, such as those in a Pattern, to play back the audio.
Sampling and Sample Mapping
Recording Audio
MASCHINE - Manual - 866