Native Instruments MASCHINE MK3 Groove Production Studio (Black) User Manual
Page 603
Controls
Description
Level
Adjusts the level of the signal sent to the Aux 1 or Aux 2 output.
Order
If
Order
is set to
Pre
, the channel will be fed into Aux 1 or Aux 2
before
the
Level
and
Pan
settings of the
MAIN
section on the
Audio
page are applied. If
Order
is set to
Post
(default setting), the
Level
and
Pan
settings of the main output also affect the signals sent to
the auxiliary outputs.
If MASCHINE is running as a plug-in, the external stereo outputs
Ext. 1
–
16
available in the
Dest.
selectors of the
AUX 1
and
AUX 2
section will correspond to virtual outputs in your host. This allows
you to send auxiliary outputs of individual Sounds or Groups from MASCHINE to their own mixer
channels within your DAW, for example.
Setting Up the Auxiliary Outputs of Sounds and Groups in Mix View
You can also easily set up auxiliary outputs for your Sounds and Groups in MASCHINE’s Mixer:
1.
Click the Mix View button on the left of the Arranger to switch from Arrange view to Mix
view:
2.
Open the extended view of the Mixer by clicking the down-pointing arrow on the left of the
Mixer:
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MASCHINE - Manual - 603