Native Instruments MASCHINE MK3 Groove Production Studio (Black) - Manual (Page 696)

If you are using MASCHINE as a plug-in in a host application, MASCHINE can receive audio from
your host on any of its eight mono virtual inputs. To know how to route audio in your host to the
virtual inputs of the MASCHINE plug-in, please refer to your host documentation. When this is
done, go directly to section
↑ 14.2.2, Step 2: Set up a Sound to Receive the External Input .
MASCHINE in Stand-Alone Mode
Please make sure that you have connected an external audio signal source to your audio inter-
face and that the inputs of the audio interface are activated. To do this:
1.
Select the Preferences… entry from the File menu to open the Preferences panel.
2. In the Audio page click the Input button, activate the desired inputs by clicking their field
in the Port column and selecting a physical input from the drop-down menu, then click
Close .
→ Audio signals coming from external sources plugged in the inputs selected here will now
be routed to the MASCHINE inputs shown in the first column.
Using Effects
Applying Effects to External Audio
MASCHINE - Manual - 696