1 example, 1 remote controlling a pc – PLANET CS-2001 User Manual

Page 835

824

33.1 Example

33.1.1 Remote Controlling a PC

Step 1. Supposing the MAC address of the PC that is desired to be remotely

controlled is 00:0C:76:B7:96:3B.

Step 2. Under Monitoring > Wake-On-LAN > Settings, click New Entry and

then set as below:
 Enter the name in the field.
 Enter 00:0C:76:B7:96:3B in the MAC Address field.
 Click OK.

（Figure 31-1）

Figure 31-1 Wake on LAN Setting

Step 3. Click WakeUp to start up the PC.

（Figure 31-2）

Figure 31-2 Clicking “WakeUp” to Start up the PC