PLANET CS-2001 - Manual (Page 622)

611
Step 4. Go to IDP > Signatures > Custom and set as below:
（Figure 19-6）
 Type the name in the Name field.
 Select IPv4 for IP Version and TCP for Communication Protocol.
 Type the Source Port No.
 Type the Destination Port No.
 Select High for Risk Level.
 Select Drop for Process.
 Tick Log and Alert for Action.
 Tick Ignore Packet direction and Ignore letter case for Advanced
Options.
 Type the content pattern in the field.
 Click OK.
（Figure 19-7）
Figure 19-6 Custom Signature Settings
Figure 19-7 Custom Signature Completed