PLANET CS-2001 - Manual (Page 370)

359
Step 9. Under Policy Object > VPN > Trunk, click the New Entry button and
then set as below: （Figure 11-229）
 Type the name in the Name field.
 Local Settings: Select LAN. Local IP / Netmask: Enter the subnet
and the mask.
 Under the Remote Settings section, select Remote IP / Netmask and
then enter the subnet and mask.
 Move VPN_01 from the Available Tunnels column to the Selected
Tunnels column.
 Tick Enable NetBIOS Broadcast over VPN.
 Click OK.
（Figure 11-230）
Figure 11-229 Configuring the Trunk
Figure 11-230 Setting Completed