PLANET CS-2001 - Manual (Page 766)

755
Step 2. Under Advance > Co-Defense System > Core Switch, set as below:
（Figure
26-3）
 Enter the name to identify the switch.
 Select the model of the switch from the Switch Model drop-down list.
 Select IPv4 from the IP Version drop-down list。
 Enter the switch’s IP address in the IP Address field.
 Enter the port number, username and password to establish a telnet
connection with the switch.
 Click OK.
（Figure 26-4）
 Click the View button to view the core switches blocking
commands.
 Click the Modify button to modify the core switches connection
settings.
 Click the Remove button to delete the core switches connection
settings.
 Clicking on the Remove Blocked Address link to remove a IP or
MAC address which is blocked by the core switch.
Figure 26-3 Configuring the Core Switch Connection