PLANET CS-2001 - Manual (Page 828)

817
32.1 Ping
Step 1. To test whether a host is reachable across an IP network, go to Monitoring
> Diagnostic Tools > Ping and then configure as below: （Figure 30-1）
 Type the Destination IP or Domain name in the Destination IP /
Domain name field.
 In Packet size configure the size of each packet. (32 Bytes by default)
 In Count, configure the quantity of packets to send out. (4 by default)
 In Wait time, specify the duration to wait between successive pings. (1
second by default)
 Select the interface from the Interface drop-down list.
 Click OK.
（Figure 30-2）
Figure 30-1 Ping Settings