PLANET CS-2001 - Manual (Page 144)

133
Step 2. Under
Policy Object > Address > LAN Group, set as below: （Figure 4-6）
 Click New Entry.
 Name: Designate a name for the group.
 Select group members from the Available address column on the left,
and then click Add.
 Click OK.
（Figure 4-7）
Figure 4-6 Grouping LAN Addresses
Figure 4-7 An Added LAN Group
Note:
1. Configuring Policy Object > Address > WAN Group / DMZ Group can be done in a similar
manner to Policy Object > Address > LAN Group.