PLANET CS-2001 - Manual (Page 721)

710
26.1.1 Creating an A Record to Load Balance a Web Server
Using the Backup Mode
Step 1. Go to Advance > Inbound Balancing > Settings and proceed with the
following settings:
 Click New Entry.
（Figure 24-2）
 Type the domain name.
 Tick Enable DNS zone.
 Click New Entry.
（Figure 24-3）
 Select A (Address) for DNS Record Type.
 Type www in the Host Name field.
 Real IP Address, select WAN1 and then enter 61.11.11.11 in the field.
 Select Round-Robin for Load Balancing Mode.
 Click OK.
 Click New Entry again.
（Figure 24-4）
 Select A(Address) for DNS Record Type.
 Type www in the Host Name field.
 For Real IP Address, select WAN2 and then type 211.22.22.22.
 For Load Balancing Mode, select Backup and then select WAN1 from
the drop-down list.
 Click OK.
（Figure 24-5）
Figure 24-2 Adding a New Domain Name