PLANET CS-2001 - Manual (Page 56)

45
Step 4. Go to Policy > Outgoing and configure the following settings:
 Click on New Entry.
 Source Address: Select the name of the LAN addresses.
(LAN1_Subnet1)
 Action: Tick Port 3 (WAN2).
 Click on Advanced Settings. For Port3 (WAN2) select Automatic.
 Click on OK.
（Figure 2-12）
 Click on New Entry.
 Source Address: Select the LAN subnet (LAN1_Subnet2).
 Action: Tick the required WAN port.
 Port 2 (WAN1): Select Routing.
 Port 3 (WAN2): Select Automatic.
 Click OK.
（Figure 2-13, 2-14）
Figure 2-12 The First Outgoing Policy Settings