beautypg.com

3 mail relay – PLANET CS-2001 User Manual

Page 445

background image

434

12.3 Mail Relay

12.3.1 Using CS-2001 as a Gateway (Set the Mail Server in

DMZ under Transparent Mode)

Prerequisite Setup

Configure Port1 as LAN1 (192.168.1.1, NAT/Routing Mode) and connect it to the

LAN which is using the IP range 192.168.1.X/24.

Configure Port2 as WAN1(61.11.11.11) and connect it to the ADSL Termination Unit

Remote (ATUR) to access the Internet.

Configure Port3 as DMZ1 (Transparent Routing) and connect it to the mail server. IP

address: 61.11.11.12.

Map the registered domain name “supportplanet.com.tw” (used here only as an

example) to the mail server IP address by creating a MX record.

In order to relay emails to recipients in supportplanet.com.tw, refer to the steps below

to configure:

Step 1. Go to Mail Security > Configuration > Mail Domains and then set as

below:

Figure 12-34

Figure 12-34 Mail Domain Settings