PLANET CS-2001 - Manual (Page 344)

333
Step 18. Settings completed.
（Figure 11-163）
Figure 11-163 IPSec Autokey Settings Completed
Step 19. Under Policy Object > VPN > Trunk, set as below:
（Figure 11-164）
 Name: Type a name.
 Local Settings: Select “LAN”. Local IP / Netmask: Type
“192.168.10.0” as A Company’s subnet address and “255.255.255.0”
as Mask.
 Remote Settings: Select Remote IP / Netmask. Remote IP /
Netmask: Type “192.168.20.0” as B Company’s subnet address and
“255.255.255.0” as Mask.
 Tunnel: Select “VPN_01” and “VPN_02” and then add them to the
right column.
 Tick Enable NetBIOS Broadcast over VPN.
 Click OK.
（Figure 11-165）