PLANET CS-2001 - Manual (Page 342)

331
Step 9. Setting completed.
（Figure 11-154）
Figure 11-154 IPSec Autokey Settings Completed
Step 10. Select Policy Object > VPN > IPSec Autokey, and then click New
Entry.
Step 11. Type VPN_02 in the Name field and then select Port3(WAN2) for the
WAN Interface. （Figure 11-156）
Figure 11-156 Name and WAN Interface Settings
Step 12. Remote Settings: Select Remote Gateway (Static IP or Hostname)
and then type B Company’s IP address in the field. （Figure 11-157）
Figure 11-157 Remote Settings
Step 13. Select “Pre-Shared Key” for Authentication Method and enter the
Pre-Shared Key String. （Figure 11-158）
Figure 11-158 Authentication Method Settings