PLANET CS-2001 - Manual (Page 833)

CS-2001 UTM Content Security Gateway User’s Manual
822
32.3 Packet Capture
Capture packetfor debugging
Step 1. Under Monitoring > Diagnostic Tools> Packet Capture the packet
capture can help to debug and capture the packet content for debugging.
( figure 30-6 )
 In interface drop list selects which one of interface is going to capture the
packet.
 In capture time list, choose hong long will be the captured time.
 Filll in the Host IP and Netmask you would like to filter.
 Configure the filtering rule
 Click Start then wait for the captured period, the result will display on the
filed.

Figure 30-6 Packet Caputre Results