PLANET CS-2001 - Manual (Page 266)

255
Step 11. Under Policy > Incoming, set as below:
（Figure 11-30）
 Select the defined trunk for VPN Trunk.
 Click OK.
（Figure 11-31）
Figure 11-30 Creating an Incoming Policy with VPN Trunk
Figure 11-31 An Incoming Policy with VPN Trunk
Note：
1. Under Policy Object > VPN > IPSec Autokey, if Remote Gateway or Client (Dynamic IP)
is selected under Remote Settings, then Aggressive Mode must be selected for IKE
Negotiation and the Local ID field and the Peer ID field must be completed for the
connection.