PLANET CS-2001 - Manual (Page 62)

51
Figure 2-17 Second Multiple Subnet Setting
Figure 2-18 Multiple Subnet Settings Completed
Note：
1. The device’s interface settings permits multiple VLAN gateways to control each of the
VLAN’s access to the Internet or communication amongst the VLANs.
2. When the PCs’ subnets or IP addresses are not on the same Interface. You may go to Policy >
LAN to LAN and create a policy (select Inside Any for both Source Address and
Destination Address) to enable LAN to LAN connection. Or, You may go to Policy > DMZ
to DMZ and create a policy (select DMZ Any for both Source Address and Destination
Address) to enable DMZ to DMZ connection.