PLANET CS-2001 - Manual (Page 151)

140
Step 3. Go to Policy Object > Virtual Server > Port Mapping and
use settings
you created in Policy Object > Service > Custom. (Figure 5-5)
Figure 5-5 Using the Pre-defined Service Settings
Step 4. Go to Policy > Incoming and configure as below:
（Figure 5-6）
 Destination Address: Select the virtual server setting configured in
the previous step.
 Service: Select the pre-defined service.
 Click OK.
（Figure 5-7）
Figure 5-6 Configuring an Incoming Policy
Figure 5-7 The Completed Settings