PLANET CS-2001 - Manual (Page 150)

139
Step 2. Go to Policy Object > Service > Custom and then configure as below:
（Figure 5-3）
 Name: Type in a name for the service.
 In row number 1 select TCP for the protocol. Leave the Client Port on
the default setting. Server Port: set as 1720 – 1720.
 In row number 2 select TCP for the protocol. Leave the Client Port on
the default setting. Server Port: set as 15328 – 15333.
 In row number 3 select TCP for the protocol. Leave the Client Port on
the default setting. Server Port: set as 15328 – 15333.
 Click OK.
（Figure 5-4）
Figure 5-3 Adding a Custom Service
Figure 5-4 The Added Custom Service
Note:
1. Normally, the port number setting for the client port falls between 0 and 65535. It is
recommended to adhere to the range mentioned above when configuring the client port
number.
2. Both the Client Port and Server Port contain two fields. You may use the two fields to
specify a range (e.g. 15328 : 15333) or to specify a single port number e.g (1720 : 1720).