PLANET CS-2001 User Manual

Page 15

Text mode
Original mode

Important：

1. Any data saved on the interface will be saved as the selected default character encoding if the

device is unable to recognize the encoding.

Step 6. The LAN interface address must reflect your network environment. The

defualt LAN interface is set to 192.168.1.x/24. However, if the LAN

interface was changed to 172.16.0.1 (subnet mask: 255.255.255.0), the IT

administrator must configure each PC in the subnet using an available IP

address from this subnet.
 Setting: Select Port1 (LAN1).
 Interface: Select LAN.
 LAN Interface Mode: Select NAT / Routing Mode.
 Fill in the IP Address and Netmask fields.

Figure7. Interface Settings

Important :

1. Note: Once the LAN interface is changed, please enter the new LAN IP address in the

browser next time when you log in the CS-2001 Web UI.