8 snmp, 1 snmp agent settings – PLANET CS-2001 User Manual

Page 77

Text mode
Original mode

2.8 SNMP

2.8.1 SNMP Agent Settings

Step 1. Go to System > Configuration > SNMP. Under the SNMP Agent Settings

section configure the following:

（Figure 2-34）

 Tick the interfaces that are permitted to send SNMP agent messages.
 Device Name: Name the device. By default, it is UTM.
 Device Location: Type the geographic location of this device. By

default, it is Taipei, Taiwan.

 Community: Type a screen name. By default, it is public.
 Contact Person: Type the email address of the contact person. By

default, it is root@public.

 Description: Type a description for the device. By default, it is UTM

Appliance.

 Click OK.
 Settings completed. From now on, the IT administrator will be kept

up-to-date with the device’s operating status through a SNMP Agent

application.

Figure 2-34 SNMP Agent Settings