PLANET CS-2001 - Manual (Page 75)

64
2.6 DDNS
Step 1. Go to System > Configuration > Dynamic DNS, and set as below:
（Figure
2-31）
 Click New Entry. Select a Service Provider from the drop-down list.
 Tick Use the IP of on the right of WAN IP and then select a WAN
port.
 Type the Username, Password and Hostname accordingly.
 Click OK.
（Figure 2-32）
Figure 2-31 Configuring the Dynamic DNS Settings
Figure 2-32 Configuring the Dynamic DNS Settings
Note:
1. The meaning of the symbols used in DDNS are as follows:
Symbol
Meaning Successful
Connection
Failed
Connection
Connected
2. If you do not have a DDNS account, you may first select a desirable service provider from the
pull-down menu and then click Sign up next to it to register an account.
3. You may configure the WAN IP by either ticking the Automatically checkbox or simply
specifying it in the WAN IP field.