PLANET CS-2001 - Manual (Page 364)

353
Step18.
Go to Policy Object > VPN > Trunk, click New Entry and then set as
below: （Figure 11-213）
 Type the name in the Name field.
 Local Settings: select LAN. Enter the IP address and the Mask in the
Local IP / Netmask field.
 Under the Remote Settings section, select Remote IP / Netmask and
then enter the subnet and the mask.
 Move the VPN_02 from the Available Tunnels to the Selected
Tunnels.
 Tick Enable NetBIOS Broadcast over VPN.
 Click OK.
（Figure 11-214）
Figure 11-213 Configuring the Second Trunk
Figure 11-214 The Second Trunk Created