PLANET CS-2001 - Manual (Page 748)

737
Step 3. Go to Policy > Incoming and then set as below:
 Click New Entry.
（Figure 24-42）
 Select the defined rule ([Virtual IP]Mail_Server_POP3(61.11.11.11))
for Destination Address.
 Select POP3(110) for Service.
 Click OK.
 Click New Entry.
（Figure 24-43）
 Select the defined rule ([Virtual IP]Mail_Server_SMTP(61.11.11.11))
for Destination Address.
 Select SMTP(25) for Service.
 Click OK.
 Click New Entry.
（Figure 24-44）
 Select the defined rule ([Virtual IP]Mail_Server_POP3(211.22.22.22))
for Destination Address.
 Select POP3(110) for Service.
 Click OK.
 Click New Entry.
（Figure 24-45）
 Select the defined rule ([Virtual IP]Mail_Server_SMTP(211.22.22.22))
from the Destination Address.
 Select SMTP(25) for Service.
 Click OK.
（Figure 24-46）
Figure 24-42 The First Policy Settings