PLANET CS-2001 - Manual (Page 690)

679
Step 5. Go to Policy > Outgoing and then set as below:
（Figure 22-16）
 Select the defined group from the Web Filter drop-down list.
 Select the defined rule from the Application Blocking drop-down list.
 Click OK.
（Figure 22-17）
Figure 22-16 Applying Application Blocking to the Policy
Figure 22-17 Policy Created
Note:
1. The Deny ALL feature of a policy can block the packets that meet the criteria. The IT
administrator can adjust the order of this policy to the first rank so as to stop LAN users from
accessing specific IP address.