PLANET FRT-405N User Manual

Web login 5. enter into the web management, Further information, Internet

Note

– 1 –

– 2 –

– 3 –

– 4 –

1. Package Contents

3. Hardware Installation

2. Physical Introduction

– 7 –

– 8 –

4. Web Login

5. Enter into the Web Management

– 5 –

– 6 –

Front Panel of FRT-405N

Rear Panel of FRT-405N

The above steps introduce simple installations and configurations

for the FRT-405N. For further configurations of different operation

modes, please refer to the user’s manual on the CD. If you have

further questions, please contact the local dealer or distributor

where you purchased this product.

2010-B53060-000

Thank you for choosing PLANET FRT-405N. Before installing the

AP, please verify the contents inside the package box.

If there is any item missing or damaged, please

contact the seller immediately.

STEP 1: Locate the FRT-405N in an optimum place, and adjust

the antenna for the best coverage.

STEP 4: Connect the Power Adapter to the FRT-405N. Check

whether the PWR LED and LAN LED on the front panel

are on accordingly.

Further Information

STEP 2: Follow the figure below to connect the WAN port.

STEP 3: Follow the figure below to connect the network

devices.

1. Click “Start” button located at the lower-left corner of your

computer

2. Click “Control Panel”
3. Double click “Network and Sharing Center” icon
4. Click “Change Adapter Settings”
5. Double click “Local Area Connection”
6. Select “Internet Protocol Version 4(TCP/IPv4)” and

click “Properties”

7. Select “Obtain an IP Address automatically” and

“Obtain DNS Server Address automatically”, and then

click “OK” button twice to save the configuration.

Default IP Address: 192.168.1.1
Default User Name: admin
Default Password: admin
Default SSID: FRT405N

STEP 1: The Web management allows you to access and

manage the Wireless Router easily. Launch the Web

browser and enter the default IP address

http://192.168.1.1

FRT-405N

Quick Installation Guide

300Mbps 802.11n Wireless

Internet Fiber Router

STEP 2: When the login window pops up, please enter the

User Name and Password. The default User Name

and Password are both “admin”.

Then click OK button to continue.

STEP 3: Now, you can see the Web management UI of the

FRT-405N.

Please go to Wireless Settings page to configure

your wireless network. For security reasons, strongly

recommended to configure the Encryption Method

and Passphrase of your wireless network.

FRT-405N

Quick Guide

CD-ROM

Power Adapter

5dBi Antenna x 2

Application

Point-to-Point Fiber Bridge

Point-to-Multipoint Fiber Router

100Base-FX
SFP Transceiver

100Base-FX
LC Fiber

Power Adapter

100Base-FX Fiber Optical

(DHCP Client or 192.168.1.2)

Internet

Data IPTV

Entertainment

2~60 km

Fiber Wireless

Router

Core Switch

Media Converter

Layer3 Fiber Switch

100

100Base-FX Fiber-optic

100

100Base-TX UTP

2.4GHz 802.11n

UPLOAD

100Mbps

DOWNLOAD

100Mbps

Gigabit Fiber

Uplink

FRT-405N

Fiber Wireless Router

FRT-405N

Fiber Wireless Router

FRT-405N

Smart Pad

100

WAN

WPS

LAN

Reset

Power

STEP 1: Connect the FRT-405N with your PC over an Ethernet

cable which is plugged into LAN port. Power on the

FRT-405N using the power adapter.

STEP 2: Set your computer to get an IP address from the

Wireless Router:

LAN

WAN

WPS

Power

WLAN

Security