PLANET CS-2001 - Manual (Page 831)

820
32.2 Traceroute
Step 1. Under Monitoring > Diagnostic Tools> Traceroute the Traceroute
command can be used by the CS-2001 to send out packets to a specific
address to diagnose the quality of the traversed network. （Figure 30-4）
 In Destination IP / Domain name enter the destination address for the
packets.
 In Packet size configure the size of each packet. (40 Bytes by default)
 In Max Time-to-Live, enter the maximum number of hops. (30 by
default)
 In Wait time, specify the duration to wait between successive pings. (2
seconds by default)
 In Interface select the interface that the packets will originate from.
 Click OK.
（Figure 30-5）
Figure 30-4 Traceroute Settings