PLANET CS-2001 - Manual (Page 360)

349
Step8. Policy Created.
（Figure 11-202）
Figure 11-202 Policy Created
Step9. Go to Policy Object > VPN > Trunk, click New Entry and then set as
below: （Figure 11-203）
 Type the name in the Name field.
 Local Settings: select LAN. Enter the local subnet and the mask.
 Under the Remote Settings section, select Remote IP / Netmask and
then enter the local subnet and the mask.
 Move the VPN_01 from the Available Tunnels column to the Selected
Tunnels column.
 Tick Enable NetBIOS Broadcast over VPN.
 Click OK.
（Figure 11-204）
Figure 11-203 Configuring the First Trunk