2 permitted ips, 1 adding a permitted ip – PLANET CS-2001 User Manual

Page 32

Text mode
Original mode

1.2 Permitted IPs

1.2.1 Adding a Permitted IP

Step 1. Under System > Administrator > Permitted IPs, click the New Entry

button and then set as below:

（Figure 1-3）

 Enter the name in the Name field.
 Select IPv4 for Protocol.
 Enter the IP address.
 Enter the netmask. (255.255.255.255 indicates one IP Address)
 Select Ping, HTTP and HTTPS for Service.
 Click OK.

Figure 1-3 Adding New Permitted IPs

Important：

1. For Permitted IPs to be effective, the IT administrator must cancel the Ping, HTTP, HTTPS,

Telnet and SSH selections under Network > Interface.

2. Configure the Permitted IPs before the cancellation of HTTP and HTTPS; otherwise, the

management interface will be inaccessible.