PLANET CS-2001 - Manual (Page 276)

265
Figure 11-54 Advanced Settings of IPSec Autokey
Step 8. Settings completed.
（Figure 11-55）
Figure 11-55 IPSec Autokey Settings Completed
Step 9. Under Policy Object > VPN > Trunk, set as below:
（Figure 11-56）
 Name: Type a name.
 Local Settings: Select “LAN”. Local IP / Netmask: Type
“192.168.10.0” as A Company’s subnet address and “255.255.255.0”
as Mask.
 Remote Settings: Select Remote Client.
 Tunnel: Select “ipsec1” and then add it to the right column.
 Tick Enable NetBIOS Broadcast over VPN.
 Click OK.
（Figure 11-57）