PLANET CS-2001 - Manual (Page 80)

69
Step 2. Under System > Configuration > Bulletin Board, configure the settings in
the Bulletin Board Announcements section.
 Click New Entry.
（Figure 2-37）
 Enter the Subject.
 Specify the Announcement Duration.
 Target Viewer: tick LAN Users and select Inside Any; tick DMZ
Users and select DMZ Any.
 Enter the Announcement Message.
 Click OK.
（Figure 2-38）
Figure 2-37 Configuring the Announcement
Figure 2-38 Announcement Created
Note:
1. You may configure the Target Viewer under Policy Object > Address > LAN/ LAN Group/
DMZ/ DMZ Group.